ArchEX (Arch Linux) with LXQt, kernel 4.10.5-1-ARCH, Yaourt and Calamares installer – Build 170327

WHAT IS ArchEX?
ArchEX 64 bit is a new (170327) Linux live DVD based on Arch Linux. Arch motto is KISS (Keep It Simple Stupid). ArchEX uses kernel 4.10.5-1-ARCH and the LXQt Desktop environment. LXQt is a lightweight Qt desktop environment. It will not get in your way. It will not hang or slow down your system. It is focused on being a classic desktop with a modern look and feel.

What’s new in ArchEX Build 170327?
I’ve installed Calamares, which is a distribution-independent system installer, with an advanced partitioning feature for both manual and automated partitioning operations. It is the first installer with an automated “Replace Partition” option, which makes it easy to reuse a partition over and over for distribution testing. Calamares works almost perfect in ArchEX. Read more about it. I’ve also added Yaourt – a Pacman frontend. If you want to install certain special packages for example Google Chrome and Spotify you must use Yaourt. Note: Spotify is pre-installed in ArchEX Build 170327.

INSTALLED SOFTWARE
Among many other programs, Firefox, Gimp, GCC, Wicd and GParted – study this package LIST.

INSTALLATION to hard drive
ArchEX can easily be installed to hard drive of those who so desire. Use ArchEX Installer (Calamares). I.e. while running ArchEX live from a DVD or USB stick. Read this INSTRUCTION and watch the slideshow below.

Screenshots
ArchEX LXQt Desktop
ArchEX starting up live
ArchEX starting up from hard drive (VirtualBox)
ArchEX Installer (Calamares) running
ArchEX (old) Installer running

READ MORE…

SlackEX (Slackware 14.2) Live DVD with KDE 4.14.27, Nvidia 375.39 and kernel 4.10.2-x86_64-exton – Build 170314

SlackEX is based on Slackware Current/14.2. Slackware is the first widely-used Linux system, which is still developing. Slackware has existed since 1993. The older the fiddle the sweeter the tune or as we say in Sweden: “Gammal är äldst”.

New features in version 170314 of SlackEX
I have replaced kernel 4.7.1-x86_64-exton with kernel 4.10.2-x86_64-exton with support for “everything”. Most important is that I have changed repositories from Slackware 14.1 to Current. I.e. Slackware 14.2. KDE is upgraded to version 4.14.27 (latest KDE version). All other component software is also upgraded to the latest Slackware Current version by now. I may also mention in particular GParted 0.27.0 (latest, not in Slackware’s repositories), VirtualBox 5.1.16 (latest, not in Slackware’s repositories), Google Chrome (not in Slackware’s repositories), Gimp 2.8.10 (installed from source), GSlapt 0.5.4b, Slackpkg 2.82.1, Firefox 52.0, Thunderbird 45.2.8, Samba 4.5.5 and GCC 5.4.0. Furthermore I have installed Grub2, which can be used as boot loader (if you want) after a hard drive install. Study the full package LIST. Note: I have replaced Wicd with NetworkManager. It works better in SlackEX.

Install SlackEX to hard drive

Use this INSTRUCTION. You can (if you want) use Grub2 (new GRUB) as boot loader. (Slackware original still uses LILO). You can (of course) also run and install SlackEX in VirtualBox and VMware.

Install SlackEX to a USB stick
Please read my INSTALL INSTRUCTIONS. NOTE: All system changes are PERSISTENT.

Why Slackware?
Slackware is grossly underestimated (in my opinion). This article give you ten (10) reasons to choose Slackware.

SCREENSHOTS
Screenshot 1 – KDE 4.14.27 Desktop with Netflix running
Screenshot 2 – KDE 4.14.27 Desktop with VirtualBox running
Screenshot 3 – Samba running
Screenshot 4 – GSlapt running
Screenshot 5 – Nvidia configuration

READ MORE…

News 170309: Yet another version of exGENT (Gentoo) is out. The best version ever…

NEWS 20170309 ABOUT exGENT
I’ve made yet a new version (20170309) of exGENT based on Gentoo Linux. It uses Xfce 4.12.1 and kernel 4.9.12. It is for the 64 bit architecture. I call it exGENT 2017 Xfce4 Live DVD. It replaces version 20170303. The ISO file is of 2670 MB due to the fact that this version has a lot of packages pre-installed. Despite this exGENT version 170309 runs surprisingly fast from DVD or USB. Even in VirtualBox and VMware. Faster than most other Linux live systems. All installed packages in exGENT have been updated to the latest available version by 170309.

What’s new in exGENT Build 170309?
The boot loader Grub Legacy has been replaced by Grub2. I started this build in the hope that I should be able to implement a new independent installer program called Calamares. I wasn’t able to do it now though. (Many dependencies to satisfy). My old installer script will have to do until I find a solution. Anyway, I think exGENT Build 170309 can be of interest because of the change to Grub2 and the fact that it has one of the newest kernels installed. MOST IMPORTANT: In versions before this one (170309) the file system wasn’t writable when running exGENT live (from DVD). Now you can emerge (install) new programs/packages even while running the system from a DVD or USB stick. If you do that and later decide to install exGENT to hard drive all your changes will follow! Furthermore you can install/transfer exGENT to a USB stick with the dd command in Linux or use Etcher and Rufus in Windows. Watch a screenshot when Etcher is running. Such installations were impossible before.

Used KERNEL
My special kernel 4.9.12-aufs-gentoo-exton corresponding Kernel.org’s kernel 4.9.12.

Screenshots
exGENT running Nvidia config
exGENT running Brasero

READ MORE…

Chromium OS – Exton Build 170212 – with YouTube and Spotify working fast and responsive

About ChromX
I have compiled Chromium OS from source for the second time. My first compiled version of Chromium OS is from 160525. Chromium OS is an open-source project that aims to build an operating system that provides a fast, simple, and more secure computing experience for people who spend most of their time on the web. My Chromium OS Build 170212 is for all 64 bit “normal” Desktop computers and laptops.

How do I run Chromium OS?

Normally you run Chromium OS from a USB stick, but the system can also be installed to hard drive. Could be useful if you want to bring new life to an old computer. Be aware of the fact that Chromium OS can’t be installed together with other Linux systems (or any other OS). It will “take” the whole disk.

The difference between Chromium OS and Google Chrome OS
Chromium OS is the open source project, used primarily by developers, with code that is available for anyone to checkout, modify, and build. Google Chrome OS is the Google product that OEMs ship on Chromebooks for general consumer use.

MANY APPS are pre-installed when ChromX is up and running
Showing installed apps – screenshot. As you can see it shows a lot of Android apps installed by me on my Android mobile phone using the same Gmail address as the one I’ve used to log in to Chromium in Chromium OS (ChromX). Even Google Play Store is there. All apps (for example Google Maps) work, but you can’t install new apps using Google Play Store. You can use the Chrome Web Store though.

Spotify is running – screenshot

READ MORE…

exGENT (Gentoo) 64 bit Linux Live DVD with kernel 4.9.8-gentoo-exton – Build 170209

NEWS 20170209 about exGENT
I’ve made yet a new version (20170209) of exGENT based on Gentoo Linux. Now with Xfce 4.12.1 and kernel 4.9.8. It is for the 64 bit architecture. I call it exGENT 2017 Xfce4 Live DVD. It replaces version 20160123. The ISO file is of 2590 MB due to the fact that this version has a lot of packages pre-installed. Despite this exGENT version 170209 runs surprisingly fast from DVD or USB. Even in VirtualBox and VMware. Faster than most other Linux live systems. All installed packages in exGENT have been updated to the latest available version by 170209.

Build 170209 of exGENT replaces Build 170206
Today I discovered some errors in exGENT Build 170206. They were not important, but nevertheless annoying. Build 170209 is totally error-free (as far as I know). While I was at it I installed Google Chrome (for all Netflix addicts) and Spotify (for all music lovers).

Used KERNEL
My special kernel 4.9.8-gentoo-exton corresponding Kernel.org’s kernel 4.9.8. It’s the latest stable kernel as of now. (20170209).

What’s new in kernel 4.9.8?
Programs etc
The best thing with exGENT is the premier auto detection of hardware and the ability to easily install the system to hard drive during a live session. Installed programs: Among many others GParted, GNU Emacs, Firefox, Google Chrome, Spotify, Thunderbird, Samba, AbiWord,
Nvidia Graphics driver 375.26 and NetworkManager. Furthermore compilation tools so that you can install programs from source the Gentoo way. (After the installation to hard drive).

Quick install to Hard Drive
exGENT Linux can be installed to hard drive in 3 – 10 min. (Depending on computer type). This means that all of you who might hesitate to perform a normal Gentoo installation – which can take up to a couple of days – now have the chance to get this great Linux system (Gentoo) installed on your computers very easy.

SPOTIFY
You can easy and quick install Spotify in exGENT. Just run the command emerge spotify. The installation takes about 1 min.
NOTE: Spotify is pre-installed in Build 170209.

Google Chrome
To be able to run Netflix in exGENT you’ll need Google Chrome. Just install it with the command emerge –ask www-client/google-chrome
Screenshot 1
Screenshot 2
Screenshot 3 – Netflix is running
NOTE: Google Chrome is pre-installed in Build 170209.

Who is exGENT/Gentoo for?
Experienced Linux users or those who really want to learn Linux. (Perhaps also for people who are bored with mainstream distributions like Ubuntu).

Screenshots
exGENT running Nvidia config
exGENT running Brasero
exGENT running Samba
exGENT running Spotify
exGENT running in VirtualBox
exGENT running in VMware
exGENT running Google Chrome and Netflix

READ MORE…

Exton|OS Build 161231 with Mate 1.6.0, Refracta Tools (build your own live Ubuntu system) and kernel 4.9.0-11-exton

exton-os-logo-worldNEWS 161231 ABOUT Exton|OS with Mate 1.16.0 and Refracta Tools
The Desktop Environment is Mate 1.16 (A fork of GNOME 2. It provides an intuitive and attractive desktop environment using traditional metaphors for Linux and other Unix-like operating systems). Program content in build 161231: Refracta Tools, Firefox, Google Chrome (for Netflix), Gimp, Vlc and GParted. Also all necessary additions in order to install programs from source. All packages have been updated to the latest available version as at December 31, 2016. Study the NEW PACKAGE list.

WHAT’S NEW in MATE 1.16?

IMPORTANT ABOUT REFRACTA TOOLS

Refracta tools are pre-installed in Exton|OS Mate Build 161231. Use them to create your own live installable Ubuntu system. I mean create your own installable Ubuntu 16.10 Live DVD once you have installed Exton|OS to hard drive. I mean change everything and then create a whole new Ubuntu live system. Start Refracta from Applications >> System Tools >> Refracta Snapshot. You don’t even have to install Exton|OS to hard drive before you can use the Refracta tools. If you have plenty of RAM you can create a new (your own!) Ubuntu system while running Exton|OS from DVD or a USB stick. Please note that the whole Refracta process (creating your new ISO) will only take 5 – 10 min!  You’ll find the ISO in /home/snapshots. The whole thing is very simple. Refracta Installer replaces Ubiquity (Ubuntu’s installer). Refracta Installer is also very simple to use. No “expert knowledge” is needed.

Exton|OS build 161231 is based on Ubuntu 16.10 64 bit and Debian Stretch/Sid (upcoming Debian 9). Exton|OS’s ISO file is a ISO-hybrid, which means that it can very easily be transferred (copied) to a USB pen drive. You can even run Exton|OS from a USB stick and save all your system changes on the stick. I.e. you will enjoy persistence! Read my INSTRUCTION. For persistence please read under B) or use UNetbootin in Windows or Linux.

SCREENSHOTS
Screenshot 1
of Exton|OS’s Mate Desktop
Screenshot 2 of Exton|OS’s Mate Desktop running Spotify
Screenshot 3 of Exton|OS’s Mate Desktop running Refracta Snapshot

READ MORE…

Other Exton Linux Systems you may like
All Exton Linux Systems
Exton Systems for the Raspberry Pi computer
Exton Android Systems for PC

LFA 64bit LINUX Live DVD Build 161114 – Create you own Linux For All/Ubuntu 16.10 live installable system!

lfa-refracta-tools-runningAbout Linux For All (LFA)
The system is based on Ubuntu 16.10, codenamed
Yakkety Yak and Debian testing (Stretch – upcoming Debian 9). It’s a total rebuild. I.e. nothing is left of the old LFA system. All installed packages have been updated to the latest version as of 161114. Kernel 4.4.0-19-exton is replaced by kernel 4.8.0-27-exton. (4.8.0-27 is the latest Ubuntu kernel). You can download “my” kernel if you want to use it in another Ubuntu/Debian system. I have also installed Nvidia’s proprietary graphics driver 370.28. Most important: I have included Refracta Tools so you can create your own Linux For All/Ubuntu live installable system!

The system language is ENGLISH.

More news about LFA build 161114
One of my previous versions of LFA (build 141120) had four (4) Desktop environments installed. Namely Unity (Ubuntu), LXDE, Razor-qt and XBMC. LFA build 161114 uses only Fluxbox as Window Manager and Cairo-Dock as Desktop Interface. Cairo-Dock is designed to be light, fast and customizable, and is desktop-agnostic. It has a powerful DBus interface, to be controlled from a terminal or another application. Features can be added by plug-ins or applets, and applets can be written in C or in any language. About Fluxbox: Fluxbox is a Window Manager for X that was based on the Blackbox 0.61.1 code. It is very light on resources and easy to handle but yet full of features to make an easy, and extremely fast, desktop experience. So who needs KDE or Gnome?

Screenshot 1: LFA’s new Desktop
Screenshot 2: Refracta Installer running
Screenshot 3: Refracta Tools running

Important about Refracta
You can use the Refracta tools (pre-installed in LFA Build 161114) to create your own installable Ubuntu Live DVD once you have installed LFA to hard drive. I mean change everything and then create a whole new Ubuntu 16.10 live system. When you start Refracta it will look like this. You don’t even have to install LFA to hard drive before you can use the Refracta tools. If you have plenty of RAM you can create a new (your own!) Ubuntu live installable system while running LFA from DVD or a USB stick. Please note that the whole Refracta process (creating your new ISO) will only take 5 – 10 min! You can then install VirtualBox in LFA so you can test run your own created new Ubuntu ISO. Or do it in Windows. By the way: You can do the whole thing in VirtualBox. I mean install LFA in VirtualBox, change everything, create a new Ubuntu 16.10 system using Refracta tools and transfer your new ISO to your server using FileZilla, which is pre-installed.

READ MORE…