KNOPPIX-EXTON 32 bit, Build 191211 – a remaster of KNOPPIX 8.6.1 – will bring your old computer back to life!

Version 8.6.1 of KNOPPIX is based on Debian/stable (Buster), with some packages from Debian/testing and unstable (Sid) for newer graphics drivers or desktop software packages. It uses kernel 5.3.5 and Xorg 7.7 (core 1.20.4) for supporting current computer hardware.

About Knoppix-Exton Build 191211
The original KNOPPIX 8.6.1 ISO is of 4320 MB. It has two kernels, 32 bit and 64 bit and almost all well-known Debian packages (including almost all KDE and Gnome packages) pre-installed. My remaster (the ISO) is of “only” 2170 MB, which makes it easier to run the system live from RAM with the boot command knoppix toram – see below.

Knoppix-Exton uses only the LXDE Desktop – screenshot. Study all installed packages in Knoppix-Exton as of 191211. You can of course add (or remove) packages even while running the system live. Use Synaptic for that. Kernel 5.3.5 is used in KNOPPIX 8.6.1/Knoppix-Exton.

Install Knoppix-Exton (KNOPPIX 8.6.1) to hard drive
KNOPPIX uses Grub Legacy as boot loader. So if you already have Grub2 installed you should avoid installing Grub when installing Knoppix-Exton. Just add start lines for Knoppix-Exton in /boot/grub/grub.cfg (in the system where you have installed Grub2). The installation program is started from the Menu –> Knoppix –> KNOPPIX HD Install – watch this screenshot.

Install Knoppix-Exton (KNOPPIX 8.6.1) to a USB stick with no persistence
Use Rufus 3.8 in Windows. It will look like this – see below.

Install/flash Knoppix-Exton (KNOPPIX 8.6.1) to a USB stick with persistence
Burn the Knoppix-Exton ISO to a DVD and start up your computer from it. Or use the USB stick created with Rufus and flash Knoppix-Exton on another USB stick. Note that you can run Knoppix-Exton live first and change everything to your liking. After that all your changes will be transferred to the USB stick if you use the “Flash Knoppix” alternative. See screenshots below.
1. GParted is started just to be sure of the correct device to install to.
2. I’m running Knoppix-Exton from /dev/sdb1. The install target is /dev/sdc (SanDisk Cruzer Contour).

Syslinux
Syslinux is used as boot loader when you use the “Flash Knoppix” alternative. Note that you can use this alternative also when installing KNOPPIX/Knoppix-Exton in VirtualBox or VMware. Then your whole virtual hard disk will be used. Watch this screenshot when I have installed Knoppix-Exton to hard drive in VirtualBox.

KNOPPIX cheatcodes/boot codes
When starting KNOPPIX/Knoppix-Exton live (from a DVD or USB stick) you can use certain boot commands. The command knoppix toram is just an example. Study all cheatcodes…
As you can see you can start KNOPPIX in certain languages: knoppix lang=ch|cn|de|da|es|fr|it|nl|pl|ru|sk|tr|tw|us

Using Samba to connect to your Windows computers in your Home Network
Just open the file manager PCManFM and go to (for example smb://192.168.0.32) as this screenshot shows. You’ll find the correct IP-address by opening a Command Prompt in Windows and running the command ifconfig.

Why a remaster of KNOPPIX 8.6.1?
KNOPPIX 8.6.1 is the best Knoppix version ever. Knoppix was my very first Linux system to remaster many years ago. Nostalgia!

DOWNLOAD
Knoppix-Exton (knoppix-exton-32bit-v8.6.1-2170mb-191211.iso) can be downloaded from the Swedish Linux Society…

md5sum

Read about my Android-x86 Systems – Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at

andex.exton.net – latest is AndEX Pie 9.0 (with GAPPS) and AndEX Oreo 8.1 (also with GAPPS)!
and
about my Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 3/2 at
raspex.exton.se – latest is RaspAnd Pie 9.0 (without GAPPS) and RaspAnd Oreo 8.1 (with GAPPS)!

Exton|OS 64 bit – based on Ubuntu 19.10 – with Budgie Desktop 10.5, Refracta Snapshot, Calamares Installer and kernel 5.4.0-exton – Build 191128

NEWS 191128 ABOUT Exton|OS with Budgie Desktop 10.5 and Refracta Snapshot
The Desktop Environment in this Exton|OS build is Budgie 10.5. (Budgie is focused on simplicity an elegance. Designed with the modern user in mind). Program content in build 191128: Refracta Snapshot, Calamares 3.2.14, Firefox, Gimp, SMPlayer, SMTube, and GParted. Also all necessary additions in order to install programs from source. Calamares is an installer framework. By design it is very customizable, in order to satisfy a wide variety of needs and use cases. Kernel 5.4.0-exton (corresponding Kernel.org‘s latest kernel 5.4) is used. Kernel 5.4 was released 191125. You can download “my” kernel and install it in newer Ubuntu/Debian systems (if you want). All packages have been updated to the latest available version as at November 28, 2019. Study the NEW PACKAGE list. Google Chrome has been removed since it’s now possible to use Netflix in Firefox. Using Refracta Snapshot you can change everything to your liking and create your own live installable Ubuntu system. I mean create your own installable Ubuntu 19.10 Live DVD once you have installed Exton|OS to hard drive.

MOST IMPORTANT CHANGES IN BUILD 191128
1. This Exton|OS version is for efi computers. You can nevertheless use the Calamares Installer in VirtualBox/VMware and thus install Exton|OS in any language. You can even use Calamares for installation to a USB stick and that way get persistence. Please read my instruction before you perform such an installation. Calamares Installer replaces Ubiquity (Ubuntu’s installer). Calamares Installer is also very simple to use. No “expert knowledge” is needed.
2. A brand new kernel – 5.4 – is used. With Windows exFAT file system support.
3. The very nice icon theme Papirus is installed and used.
I haven’t changed the wallpapers since it’s hard to find nicer ones.

WHAT’S NEW in kernel 5.4?

SCREENSHOTS
Screenshot 1 – Exton|OS’s Budgie root Desktop
Screenshot 2 – Exton|OS’s Budgie live Desktop

READ MORE…

Read about my Android-x86 Systems – Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at

andex.exton.net – latest is AndEX Pie 9.0 (with GAPPS) and AndEX Oreo 8.1 (also with GAPPS)!
and
about my Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 3/2 at
raspex.exton.se – latest is RaspAnd Pie 9.0 (without GAPPS) and RaspAnd Oreo 8.1 (with GAPPS)!

ExLight 64bit EFI, Build 191120, based on Debian 10 “Buster” with Enlightenment 0.22.4-2, Refracta Snapshot, Calamares and kernel 5.4.0-rc8-exton

NEWS 191120 ABOUT ExLight
I’ve made a new version of ExLight with the Enlightenment 0.22.4-2 Desktop environment and Calamares 3.2.4-3 Installer Framework .

New sources 191120
This new version of ExLight is based on Debian stable 10 Buster. Build 191120 is a total rebuild of ExLight. The ISO file size is of only 1010 MB, which means that ExLight now can run even faster from RAM. I.e. load to RAM – screenshot.

KERNEL
ExLight Build 191120 uses kernel 5.4.0-rc8-exton, corresponding Kernel.org‘s latest kernel 5.4-rc8.

What’s new in kernel 5.4?

Installed packages
Study all installed packages in ExLight Build 191120.

MOVIE about Calamares Installer
Watch a movie
about the Calamares installation process in VirtualBox. You can use the Calamares 3.2.4-3 Installer Framework to install ExLight to your computer in any language. You can even use Calamares in VirtualBox and VMware – i.e. non-efi computers. Watch this animated GIF. (It’s for DebEX Budgie, but works in the same way in ExLight).

THE REAL McCoy
ExLight is a pure Debian system. I.e. no traces of Ubuntu, Kubuntu etc. New releases of Ubuntu are always based on Debian. So is ExLight.

SCREENSHOTS
1. The Enlightenment 0.22.4-2 Desktop for root – using WPA supplicant
2. The Enlightenment 0.22.4-2 Desktop for the ordinary user user
3. Connection from ExLight to a Windows computer
4. Using ConnMan for WiFi connections

READ MORE…

Read about my Android-x86 Systems – Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at

andex.exton.net – latest is AndEX Pie 9.0 (with GAPPS) and AndEX Oreo 8.1 (also with GAPPS)!
and
about my Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 3/2 at
raspex.exton.se – latest is RaspAnd Pie 9.0 (without GAPPS) and RaspAnd Oreo 8.1 (with GAPPS)!

Run Raspberry Pi’s PIXEL Desktop on a PC or Mac – an Exton modified Build 191102 with Refracta Snapshot (so you can create your own Raspberrypi Debian 10 Pixel system)

NEWS 191102 about Raspberry Pi Debian 10 Pixel – 32bit – an Exton Build
My previous Debian Pixel Build from is from 190705 . Study all included packages in Build 191102- latest by 191102. I’ve added NetworkManager and also Wicd, which makes it easier to configure wireless connections. Choose the one which works for you.

Reason for a new Raspberry Pi Debian 10 Pixel build right now
Yesterday (191101) two members on this site wrote to me saying that Refracta Installer didn’t work for them. I checked it and they were right. The Refracta Installer had to be upgraded from version 9.3.3 to version 9.5.3. While I was at it I also upgraded Refracta Snapshot to the latest version – 10.2.9.

Most important changes in Build 191102
This build replaces version 161223 , 170425, 180316, 180928 and 190705 . I’ve upgraded Raspbian/Debian from Stretch to Buster – Debian 10 stable. I’ve also upgraded the kernel from 4.19.0-5-686-pae to 4.19.0-6-686-pae. I’ve also included kernel 4.19.0-6-686, which shall be used on older computers. PAE (Physical Address Extension) increases the physical memory addressable by the system from 4 GB to 64 GB. Firefox have been installed so you’ll have a browser when logged in as root. You can’t run Chromium as root. Another good thing about Firefox is that you can use it to watch Netflix movies.

SCREENSHOTS
Screenshot 1 – Spotify running
Screenshot 2 – Samba running (reach your Windows computers in your network)
Screenshot 3 – Refracta Snapshot has started

READ MORE…

Read about my Android-x86 Systems – Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at

andex.exton.net – latest is AndEX Pie 9.0 (with GAPPS) and AndEX Oreo 8.1 (also with GAPPS)!
and
about my Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 3/2 at
raspex.exton.se – latest is RaspAnd Pie 9.0 (without GAPPS) and RaspAnd Oreo 8.1 (with GAPPS)!

ExTiX 19.10, Build 191023, with LXQt 0.14.1, Refracta Snapshot, Nvidia 430.50 and kernel 5.3.7-extix

ExTiX 19.10 LXQt – Build 191023
I have made a new version of ExTiX – The Ultimate Linux System. I call it ExTiX 19.10 LXQt Live DVD. (The previous LXQt version was 19.5 from 190508). The best thing with ExTiX 19.10 is that while running the system live (from DVD/USB) or from hard drive you can use Refracta Snapshot (pre-installed) to create your own live installable Ubuntu system. So easy that a ten year child can do it! One other very good thing with this version of ExTiX is that it is quite light. The ISO file is of only 1200 MB, which means that you can run the system super fast from RAM. When the boot process is ready you can eject the DVD or USB stick. Use Boot alternative 2 or Advanced options… >> load to RAM. Nvidia’s proprietary Graphics driver 430.50 is pre-installed in ExTiX 19.10. It will automatically be used if your computer has support for it

ABOUT
ExTiX 19.10
LXQt DVD 64 bit is based on Debian and Ubuntu 19.10. The original system includes the Desktop Environment Gnome. After removing Gnome I have installed LXQt 0.14.1. LXQt is the Qt port and the upcoming version of LXDE, the Lightweight Desktop Environment. It is the product of the merge between the LXDE-Qt and the Razor-qt projects: A lightweight, modular, blazing-fast and user-friendly desktop environment. NOTE: This ExTiX LXQt Build is for installation to UEFI-enabled computers. You shall use Refracta Installer for that.

The system language is ENGLISH.

SCREENSHOTS
1. ExTiX LXQt – root’s Desktop
2. ExTiX LXQt – live’s Desktop
3. Using Refracta Installer – chroot for installing Grub
4. live’s Desktop using the Nvidia Graphics driver
5. Connection with a Windows computer via PCManFM-Qt

READ MORE…

Read about my Android-x86 Systems – Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at

andex.exton.net – latest is AndEX Pie 9.0 (with GAPPS) and AndEX Oreo 8.1 (also with GAPPS)!
and
about my Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 3/2 at
raspex.exton.se – latest is RaspAnd Pie 9.0 (without GAPPS) and RaspAnd Oreo 8.1 (with GAPPS)!

Run Raspberry Pi’s PIXEL Desktop on a PC or Mac – an Exton modified Build 190705 with Refracta Tools (so you can create your own Raspberrypi Debian 10 Pixel system)

NEWS 190705 about Raspberry Pi Debian 10 Pixel – 32bit – an Exton Build
My previous Debian Pixel Build from is from 180928 . Study all included packages in Build 190705- latest by 190705. I’ve added NetworkManager and also Wicd, which makes it easier to configure wireless connections. Choose the one which works for you.

NEWS 180928 – a YouTube video about Debian Pixel
I’ve discovered a YouTube video about my Debian Pixel Build 170425. The video is called Debian Pixel..Exton forks it for you..
This video is of course also valid for Build 190705 and 180928. By watching the video you can learn a lot about Debian Pixel’s features.

Most important changes in Build 190705
This build replaces version 161223 , 170425, 180316 and 180928 . I’ve upgraded Raspbian/Debian from Stretch to Buster – Debian 10 stable to be officially released tomorrow (190706). I’ve also upgraded the kernel from 4.9.0-9-686-pae to 4.19.0-5-686-pae. I’ve also included kernel 4.19.0-5-686, which shall be used on older computers. PAE (Physical Address Extension) increases the physical memory addressable by the system from 4 GB to 64 GB. Firefox have been installed so you’ll have a browser when logged in as root. You can’t run Chromium as root. Another good thing about Firefox is that you can use it to watch Netflix movies.

OLD NEWS FROM 161223

On December 22, 2016 I read that the Raspberry Pi Foundation had announced the release of a new PIXEL image that can be booted on a PC or Mac. Study this site. I saw immediately that there was no installer included, which I thought was a little disappointing. Come to think of Refracta tools, which work very well in Debian and Ubuntu. I quickly made a “remix” of the Raspberry Pi Foundation PIXEL image. My remix thus include Refracta tools. This means that you can easily install the system to hard drive and you can just as easily make your own remix of the Raspberry Pi Foundation PIXEL image. I’ve added a few packages. Most important Synaptic, which I find essential.

About the PIXEL Desktop
Raspbian had its biggest update ever in September, 2016, thanks to a dazzling new desktop environment called PIXEL. Raspbian with PIXEL (which stands for “Pi Improved Xwindow Environment, Lightweight”) is a huge software update to the desktop environment. It introduces a crisp new interface, and is brimming with new programs and features.

SCREENSHOTS
Screenshot 1 – Spotify running
Screenshot 2 – Samba running (reach your Windows computers in your network)
Screenshot 3 – Refracta Snapshot has started
Screenshot 4 – Refracta Installer has started in VMware
Screenshot 5 – Wireless connection with NetworkManager and Wicd (installed in Build 170425, 180316, 180928 and 190705)
Screenshot 6 – Wifi connection using NetworkManager – in detail

READ MORE…

Read about my Android-x86 Systems – Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX Pie 9.0 (without GAPPS) and AndEX Oreo 8.1 (with GAPPS)!
and
about my Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 3/2 at
raspex.exton.se – latest is RaspAnd Pie 9.0 (without GAPPS) and RaspAnd Oreo 8.1 (with GAPPS)!

Exton|OS 64 bit – based on Ubuntu 19.04 – with Budgie Desktop 10.5, Refracta Snapshot, Calamares Installer and kernel 5.1.3-exton – Build 190521

NEWS 190521 ABOUT Exton|OS with Budgie Desktop 10.5 and Refracta Snapshot
The Desktop Environment in this Exton|OS build is Budgie 10.5. (Budgie is focused on simplicity an elegance. Designed with the modern user in mind). Program content in build 190521: Refracta Snapshot, Calamares 3.2.4, Firefox, Gimp, SMPlayer, SMTube, and GParted. Also all necessary additions in order to install programs from source. Calamares is an installer framework. By design it is very customizable, in order to satisfy a wide variety of needs and use cases. Kernel 5.1.3-exton (corresponding Kernel.org‘s latest kernel 5.1.3) is used. You can download “my” kernel and install it in newer Ubuntu/Debian systems (if you want). All packages have been updated to the latest available version as at May 21, 2019 Study the NEW PACKAGE list. Google Chrome has been removed since it’s now possible to use Netflix in Firefox. Using Refracta Snapshot you can change everything to your liking and create your own live installable Ubuntu system. I mean create your own installable Ubuntu 19.04 Live DVD once you have installed Exton|OS to hard drive.

MOST IMPORTANT CHANGES IN BUILD 190521
1. This Exton|OS version is for non-efi computers, which means that you can use the Calamares Installer in VirtualBox/VMware and thus install Exton|OS in any language. You can even use Calamares for installation to a USB stick and that way get persistence. Please read my instruction before you perform such an installation. Calamares Installer replaces Ubiquity (Ubuntu’s installer). Calamares Installer is also very simple to use. No “expert knowledge” is needed.
2. A brand new kernel – 5.1.3 – is used.
3. The very nice icon theme Papirus is installed and used.
I haven’t changed the wallpapers since it’s hard to find nicer ones.

WHAT’S NEW in kernel 5.1?

SCREENSHOTS
Screenshot 1
– Exton|OS’s Budgie live Desktop
Screenshot 2 – Exton|OS’s Budgie root Desktop
Screenshot 3 – Exton|OS’s Budgie Desktop installing Spotify
Screenshot 4 – Exton|OS’s Budgie Desktop running Refracta Snapshot

READ MORE…


Read about my Android-x86 Systems – Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX Pie 9.0 (without GAPPS) and AndEX Oreo 8.1 (with GAPPS)!

and
about my Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 3/2 at raspex.exton.se – latest is RaspAnd Pie 9.0 (without GAPPS) and RaspAnd Oreo 8.1 (with GAPPS)!

PuppEX Bionic 64 bit, uefi, compatible with Ubuntu 18.04 :: Build 190330

NEWS 190331
Yesterday I released my first version of PuppEX Bionic64. After that I have discovered a way to install and run Spotify in PuppEX. So now you can run YouTube, Netflix and Spotify in the new PuppEX version of 190331. What more can one wish for?

ABOUT PuppEX Bionic Build 190330
My newest Puppy derivative is built from Puppy Linux 8.0 BionicPup 64 bit. I have added Google Chrome (for Netflix), PCManFM, LXTerminal and many development tools. I have also compiled a new kernel – 5.0.5-puppex. Kernel 5.0.5 is the latest stable kernel available from Kernel.org as of 190330. Furthermore I have installed Nvidia’s Proprietary Graphics driver 418.56. The Nvidia driver will be used if your computer/card is “good/modern” enough. If not automatically just open up a terminal and run the command nvidia-xconfig. Then restart X. Note: Firefox can’t be used in Puppy Linux. You won’t have sound.

PuppEX Bionic64 is compatible with Ubuntu 18.04, which means that Ubuntu packages for Ubuntu 18.04 can be installed and used in PuppEX. The PuppEX Bionic ISO is of 827 MB.

Performance
Puppy Bionic64 original is of only 354 MB. PuppEX Bionic64 is despite this still running as fast as the original, which means it runs very, very fast compared to most other Linux systems. (Puppy/PuppEX runs from RAM).

Study ALL installed packages in PuppEX Bionic64

SCREENSHOTS
PuppEX Bionic’s Desktop
Showing all main extra packages
Showing when Netflix is running
Showing a Wifi connection
Showing Nvidia settings
Spotify is running in PuppEX Build 190331

READ MORE…

Read about my Android-x86 Systems – Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at

andex.exton.net – latest is AndEX Pie 9.0 (without GAPPS) and AndEX Oreo 8.1 (with GAPPS)!

and about my Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 3/2 at
raspex.exton.se – latest is RaspAnd Pie 9.0 (without GAPPS) and RaspAnd Oreo 8.1 (with GAPPS)!

ExTiX 19.1.2, Build 190102, with LXQt 0.12, Kodi 18 “Leia”, Refracta Snapshot, Nvidia and kernel 4.20.0-exton

NEWS 190104 ABOUT ExTiX LXQt Mini 19.1.3, Build 190104
I’ve made a new “mini” version of ExTiX. The ISO file is now only of 837 MB, which is good if you want to run the system superfast from RAM. This build has everything Build 19.1.2 has except for Kodi 18 Leia. You can, however, install Kodi 18 if you want. Use Synaptic for that. Watch this screenshot. You can (of course) install thousands of other packages if you want. Study all pre-installed packages in ExTiX 19.1.3.

ExTiX 19.1.2 – Build 190102
I have made a new version of ExTiX – The Ultimate Linux System. I call it ExTiX 19.1.2 LXQt/Kodi Live DVD. (The previous LXQt version was 18.7 from 180723). The best thing with ExTiX 19.1.2 is that while running the system live (from DVD/USB) or from hard drive you can use Refracta Snapshot (pre-installed) to create your own live installable Ubuntu system. So easy that a ten year child can do it! As an alternative to LXQt you can run Kodi 18 Leia. Just start Kodi like any other program while logged in to the LXQt Desktop as the ordinary user live. I have enabled a few addons in Kodi. Most important the Netflix addon. One other very good thing with this version of ExTiX is that it is very light. The ISO file is of only 1040 MB, which means that you can run the system superfast from RAM. When the boot process is ready you can eject the DVD or USB stick. Use Boot alternative 3 or Advanced options… >> load to RAM.

ABOUT
ExTiX 19.1.2
LXQt/Kodi DVD 64 bit is based on Debian and Ubuntu 18.04.1 LTS. The original system includes the Desktop Environment Gnome. After removing Gnome I have installed LXQt 0.12.0. LXQt is the Qt port and the upcoming version of LXDE, the Lightweight Desktop Environment. It is the product of the merge between the LXDE-Qt and the Razor-qt projects: A lightweight, modular, blazing-fast and user-friendly desktop environment. I have also installed Kodi 18 Leia with some addons already enabled. Most important Netflix, Plex and Amazon Video addons. NOTE: This ExTiX LXQt Build is for installation to UEFI-enabled computers. You shall use Refracta Installer for that.

The system language is ENGLISH.

WHAT’S SO SPECIAL about ExTiX and especially the new version from 190102?
1. The ExTiX ISO’s are ISO-hybrids, which means that they can very easily be transferred (copied) to a USB pen drive. You can even run ExTiX from the USB stick and save all your system changes on the stick. I.e. you will enjoy persistence!
2. Another big improvement is that both ExTiX versions can run from RAM. Use Boot alternative 3 (load to RAM). When the system has booted up you can remove the disc (DVD) or USB stick. You’ll need at least 2 GB RAM to run ExTiX that way. Running from RAM means that the system will run faster than from a DVD or a USB stick. Everything will be superfast I would say! Especially since the ISO file is of only 1040 MB!
3. ExTiX LXQt is now more stable than ever. All packages have been upgraded to the latest version by 190102.
4. I’ve replaced kernel 4.18.0-rc5-extix with kernel 4.20.0-exton. Kernel 4.20 is the latest kernel by 190102.
5. I have replaced Ubuntu’s installation program Ubiquity (live installer) with Refracta Installer. It works very well. I.e. a new user (your user) will be created during the installation process and you’ll get a chance to change root’s password. Just start the installer from the menu under System.
6. The best thing with ExTiX 19.1.2 is that while running the system live (from DVD/USB) or from hard drive you can use Refracta Snapshot (pre-installed) to create your own live installable Ubuntu system.
7. As an alternative to LXQt you can run Kodi 18 Leia. Just start Kodi like any other program while logged in to the LXQt Desktop as the ordinary user live. I have enabled a few addons in Kodi. Most important the Netflix addon. NOTE: You can’t run Kodi as root. (You won’t have sound).
8. Nvidia proprietary Graphics driver 410.78 (patched for kernel 4.20) is pre-installed in ExTiX 19.1.2. It will be used automatically if your computer has support for it.

SCREENSHOTS
1. Kodi 18 running
2. ExTiX LXQt/Kodi – live’s Desktop
3. ExTiX LXQt/Kodi – root’s Desktop
4. Kodi 18 running – choosing Video addons
5. ExTiX LXQt 19.1.3 Mini running in VMware
6. ExTiX LXQt 19.1.3 Mini running in VirtualBox

Kodi 18 in action – watch an animated GIF…

READ MORE…


Read about my Android-x86 Systems – Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX Oreo 8.1!

and

about my Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 3/2 at
raspex.exton.se – latest is RaspAnd Oreo 8.1!


ExTiX 18.10 – based on Ubuntu 18.10 “Cosmic Cuttlefish” – with LXQt 0.13.0, Refracta Tools, Calamares Installer and kernel 4.18.12-exton – a non-efi Build 181006

I have made a new extra version of ExTiX – The Ultimate Linux System. I call it ExTiX 18.10 LXQt Live DVD. It is for non-efi computers and VirtualBox/VMware. I.e. you can use the Calamares Installer also in for example VirtualBox and VMware. Which means that you can install ExTiX in any language.

ABOUT
ExTiX 18.10
LXQt DVD 64 bit is based on Debian and upcoming Ubuntu 18.10 Cosmic Cuttlefish (to be released 181018). The original system includes the Desktop Environment Gnome. After removing Gnome I have installed LXQt 0.13.0. LXQt is the Qt port and the upcoming version of LXDE, the Lightweight Desktop Environment. It is the product of the merge between the LXDE-Qt and the Razor-qt projects: A lightweight, modular, blazing-fast and user-friendly desktop environment. NOTE: This ExTiX LXQt Build is for installation to non UEFI-enabled computers and VirtualBox/VMware.

The system language is ENGLISH.

Used KERNEL
My special kernel 4.18.12-exton corresponding Kernel.org’s latest stable kernel 4.18.12. You can download “my” kernel if you want to use it another Ubuntu/Debian system.

What’s new in kernel 4.18?

WHAT’S SO SPECIAL about ExTiX and especially the new version from 181006?
1. The ExTiX ISO’s are ISO-hybrids, which means that they can very easily be transferred (copied) to a USB pen drive. You can even run ExTiX from the USB stick and save all your system changes on the stick. I.e. you will enjoy persistence!
2. Another big improvement is that both ExTiX versions can run from RAM. Use Boot alternative 4 (Load to RAM). When the system has booted up you can remove the disc (DVD) or USB stick. You’ll need at least 2 GB RAM to run ExTiX that way. Running from RAM means that the system will run faster than from DVD or USB stick. Everything will be superfast I would say!
3. All packages have been upgraded to the latest version by 181006.
4. You can install that you can install Nvidia’s proprietary graphics driver (without problems) if you like.
5. You can install ExTiX to hard drive using Calamares Installer on older non-efi computers (and VirtualBox/VMware). Which means that you can install ExTiX in your preferred language.
6. While running ExTiX LXQt 18.10 live or from hard drive you can use Refracta snapshot (pre-installed) to create your own live installable Ubuntu system. A ten year child can do it!

THE IMPORTANCE of ExTiX LXQt now being based on Ubuntu 18.10 (UNSTABLE/DEVELOPMENT)
I don’t think it is too important since ExTiX LXQt doesn’t use complicated Desktop Environments like KDE, Gnome or Unity. Programs won’t crash or anything like that. And I haven’t discovered any bugs to report.

SCREENSHOTS
Screenshot of ExTiX 18.10 root Desktop – LXQt 0.13.0
Screenshot of ExTiX 18.10 live Desktop – LXQt 0.13.0
Calamares running in VMware in ExTiX 18.10
Refracta tools running while logged in as user live
Connections to Windows computers via PCManFM-qt using Samba
ExTiX running in VMware
ExTiX running in VirtualBox

READ MORE…


Read about my Android-x86 Systems – Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX Oreo 8.1!

and

about my Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 3/2 at
raspex.exton.se – latest is RaspAnd Oreo 8.1!